Brief introduction of T12 soldering iron head
T12 soldering iron head is the model and name of the soldering iron head which is standard equipment of fx-951 electrostatic removing welding platform launched by Japan HAKKO company.
T12 tip is a composite tip, which is a combination of heating core, temperature sensor and tip, also called T12 tip.
The characteristic of T12 soldering iron head is that the sensor is fully pre positioned and highly sensitive to temperature change.
Basic properties and characteristics of T12 iron head
1. Suitable for white light fx-950 / fx-951 / fx-952 welding platform;
2. Lead free, environmental friendly, Roh compliant, with SGS report
3. 40000 solder joints can be achieved at 400 ℃ (plus or minus 20 ℃);
4. Up and down tin is smooth;
5. The composite welding tip and heating core are designed in one, fast and hot enough, and can handle the welding freely no matter the size of welding spot or lead-free welding.
General model of T12 soldering iron head
T12-B,T12-B2,T12-B3,T12-B4,T12-BC1,T12-BC2,T12-BC2Z,T12-BC3,T12-BC3Z,T12-BCF1,T12-BCF1Z,T12-BCF2,T12-BCF2Z,T12-BCF3,T12-BCF3Z,T12-BL,T12-BZ,T12-C1,T12-C4,T12-C4Z,T12-CF4,T12-CF4Z,T12-D4,T12-D08,T12-D12,T12-D16,T12-D24,T12-D52,T12-DL08,T12-DL12,T12-DL32,T12-DL52,T12-I,T12-IL,T12-ILS,T12-J02,T12-JL02,T12-JS02,T12-K,T12-KF,T12-KL,T12-KR,T12-KU
Application scope of soldering iron head of various specifications and models
Type B (cone / tip)
Special point: B-type iron head has no directionality, and the front end of the whole iron head can be welded.
Scope of application: suitable for general welding, regardless of the size of the solder joints, can also use B-type iron head.
Type K (cutter head)
Special point: it can be welded by knife shaped part, vertical type or pull welding type. It belongs to multi-purpose soldering iron head.
Application: suitable for welding SOJ, PLCC, SOP, QFP, power supply, grounding parts, modified tin bridge, connector, etc.
Type I (tip)
Special point: the tip of the iron head is fine.
Application scope: it is suitable for fine welding or narrow welding space. It can also modify the tin bridge produced during chip welding.
Type D (flat / slotted)
Flat type includes D08, D12, D16, D24, DL32, D4, D52, etc
Special point: use the nozzle part for welding.
Scope of application: suitable for welding requiring more tin, such as welding environment with large welding area, thick terminal and large welding pad.
Type BC (horseshoe / chamfered cylinder)
Horseshoe type includes C1, BC1, BC2, BC3, C4, etc
Special point: use the bevel part of the front end of the iron head for welding, which is suitable for welding with more tin.
Application scope: the application scope of type C soldering iron head is similar to that of
type D soldering iron head, for example, the case of large welding area, thick terminal and large welding pad is applicable.
BC1, C1 and other soldering iron heads are very fine, which are suitable for welding small components, or correcting the tin bridge and tin column produced during surface welding. If only a small amount of solder is needed for welding, it is suitable to use CF type iron head with tin plating only on the bevel.
BC2, BC3 soldering iron head, suitable for welding resistor, diode and other components, SOP and QFP with large pitch can also be used.
C4 and C5 are applicable to the grounding of thick terminals and circuit boards. Power supply and other welding occasions requiring large heat.
